PP strapping equipment

PP strapping equipment

We are offering wide range of packing machines and tools, designed for PP (polypropylene) strap fastening and sealing.

Manual PP, PET fastening tools:PP juostai

Strapping tool for work with wire buckles

Tool that tensions and cuts the strapping tape. Suitable for work with PET and PP strap. Width of the tape: 9 – 19 mm, thickness: 0,5 – 0,9 mm.
Suitable buckles for this tool, can be found here.

 

metalinėms spynelėms

Strapping tool for work with metal buckles

This manual tool tensions, cuts and closes the buckle. Suitable for work with PET and PP straps. Depending on width of strap that is used, different tensioners and buckles are being chosen: 12(13) mm, 15(16) mm, 19 mm. Thickness of strapping tape: 0,5 – 0,8 mm. Suitable buckles for this tool, can be found here.

GT-ONE_big

Battery strapping tools for PP, PET strap

To improve production, we are offering efficient battery strapping tools that are suitable for work with PP (polypropylene) and PET (polyester) strap. They perfectly fit, where metal and wire buckles cannot be used or higher speed of packing is needed. Thanks to self-performed functions – tensioning, melting and  cutting – a solid sealing being achieved. Depending on tape’s width, thickness and break load characteristics, different strapping tools are being chosen:

For 10 – 16 mm width and 0,5 – 1 mm thickness tape, maximum tension 2750 N

For 16 – 19 mm width and 0,8 – 1,3 mm thickness tape, maximum tension 4000 N

For PET strapping only – 19 – 25 mm width and 0,1 – 1,3 thickness, maximum tension 4500 N.

Pneumatic strapping tools for PP, PET strap

POLI_HT

To mechanize production, we are offering efficient, powerful, reliable, suitable for PP and PET strapping, pneumatic tools. They fit perfectly, where compressed air is  available and speed of packing is needed. Thanks to self-performed functions – tensioning, melting and cutting – a solid sealing being achieved. Depending on tape’s width, thickness and break load characteristics, different strapping tools are being chosen:

For 10 – 19 mm width and 0,4 – 0,8 mm thickness tape, maximum tension 1800 N

For 13 – 19 mm width and 0,6 – 1,3 mm thickness tape, maximum tension 3000 N

For 16 – 19 mm width and 0,8 – 1,3 mm thickness tape, maximum tension 4000 N

(19 mm – 5000 N)

For PET strapping – 25 – 32 mm width and 0,8 – 1,3 mm thickness, maximum tension 5000 N (32 mm – 6000 N)

AUTOMATIC AND SEMI-AUTOMATIC PP STRAPPING MACHINES.

Universal, semi-automatic, PP tape strapping table.

i-10

The latest and most modern semi-automatic strapping table from company “Strapack” in Japan – amazingly quiet, which makes it ideal for office use as well as use in any industrial and commercial facilities. Less moving parts and simple sealing head design assure ease of maintenance and lower cost of operation. Having a lower energy consumption than any other strapping machine, it is the new generation of the semi automatic strapping machines.

  • Strap tension – 20 – 392 N (2 – 40 kgf) adjustable by potentiometer.
  • Strap width – 5, 6, 9, 12 (15,5 mm). Width can be changed without changing additional parts (except for 15,5 mm)
  • Table’s height – 750 mm, width – 543 mm, length – 780 mm, weight – 45 kg.
  • Smallest product dimensions – 100 x 30 mm (width x height)
  • Maximum product dimensions– unlimited.
  • It has automatic strap ejection, when empty strapping cycle occurred.
  • It has fast warming up of heating element to reach working temperature. (45 sec.).
  • Feed length memory.
  • Voltage 100 – 120, 200 – 240 V 1 phase 50/60 Hz 0,25 KVA

SPECIALIZED SEMI-AUTOMATIC PP STRAPPING MACHINES.

D-53 X2LB – low base strapping machine

This table has similar specifications like i-10. It is suitable for packing big and heavy products. It’s height only 34 cm from the ground, so it is not needed to lift product very high.

D-53 X2LB

D-53 Desktop2 – desk-top strapping machine

One of the most compact semi-automatic models. It can bound small cards, blanks and flyer bundles without damaging the product.

D-53 Desktop2

i-10 NA – narrow strapping machine

When every centimeter is important, the narrow i-10 version is being chosen. It’s width is reduced from 780 mm to 588mm.

i-10NA

D-53 RS2 – side seal semi-automatic strapping machine for donut-shaped objects

Unique strapping table, designed to strap donut-shaped bundles such as tires, wires, cables, tubes and hoses. Maximum product weight – 30 kg, strap tension is regulated from 2 to 70 kg.

 D-53 RS2

UNIVERSAL AUTOMATIC MACHINES

Standard automatic models RQ and JK has high productivity. Depending on model and package dimensions, machine can make up to 64 cycles per minute. Machine ready to operate in less than 25 seconds. Self diagnostic microprocessor continuously monitors critical electrical functions and automatically warns for possible problems. Another advantage of these machines, that they have self -lubrication function, which reduces wear of parts and increases machine’s operational time. Strap changing is especially easy. All indicators, control bulbs and regulators are placed in visible and easily accessible places. Strap width – 5, 6, 9, 12, (15,5) mm, can be changed without changing additional parts (except for 15,5 mm). It is possible to connect foot pedal, when both hands are being busy. All machines have metal wheels, so there is a possibility to work in every place where electric source is available. Arch measurements are selected depending on customers biggest product’s measurements. Optional – table top with gravity rollers.

 RQ8000

Special automatic machines for automatic lines

RQ-8A – fully automatic strapping machine

Standard model RQ-8 version with motorized tabletop belt, perfectly suitable to integrate into packing lines. The conveyor speed can be adjusted by inverter from 9,8 to 29,4 meters per minute, so it is adopted to every line. These machines have same technical characteristics as standard models. Patented lubrication free system allows longer working with bigger periods between services.

RQ-8A-L

RQ-8Y – side strapping machine

Side strapping automatic model RQ-8Y, perfectly suitable to integrate into packing lines. Because of form of this machine, this model is suitable for packing heavy products, since the weight  of the product  is on the conveyor and not on the strapping machine. In aplications where dusts and dirt are a factor, this side -mounted head is desirable.

 rq-8y

Other specialized automatic machines

  • Low base machines;
  • Cross/double strapping;
  • Machines for mail, print and newspapers;
  • Stainless steel machines for food’s, chemistry’s or medicine’s industry;
  • Machines for small products;
  • Machines for cardboard industry;
  • Machines for Lumber, wood and pipes;
  • For rounded products;
  • Machines for tiles, firewood, bricks;
  • Pallet strapping.